Fisher & Paykel Oxygen Inlet Kit for myAIRVO™ 2 Humidifier

Apria Direct is happy to introduce to you the Fisher & Paykel myAIRVO™ 2 Humidifier Oxygen Inlet Kit!

If you’re looking for a way to attach supplemental oxygen to your myAIRVO™ 2 High Flow Therapy Device, then look no further. This oxygen inlet kit is authentic, reliable and convenient – making it easier than ever to ensure that your supplemental oxygen connects properly and you can receive all the benefits of a highly effective flow of humidified oxygen. The myAIRVO 2 also has a builtin oxygen analyzer to help show you the amount of oxygen that is being delivered during therapy. You won’t have to worry about any added stress with this dependable, easy-to-use kit!

However, please note that you should never connect more than 60L/min of O2 to the oxygen inlet port on the back of your unit as this may damage or risk spillage onto your myAIRVO 2 device. But even with this limitation, you can trust that your oxygen source will stay connected and secure whenever necessary.

The Fisher & Paykel myAIRVO 2 Humidifier Oxygen Inlet Kit offers peace of mind and convenience – perfect for potential customers who want an all-in-one solution. Enjoy secure connection without worry when you use this clear winner from Fisher & Paykel!

Here’s how to install the oxygen inlet kit correctly:

1. Make sure the power cord connector is well secured to the rear of the unit.


2. Ensure the unit side is clean and cleared of debris.


3. Attach the tubing to the filter holder approximately 0.3 inch (1 cm).


4. Ensure the adhesive label has been removed from the oxygen inlet port and firmly attach to the myAIRVO 2 unit.


5. Once attached, wait 24 hours before use to allow the adhesive to set.

Please see your myAIRVO™ 2 user manual for more detailed instructions if you are still struggling with the above pointers..

Features:

• Allows you to receive supplemental oxygen during your humidified high flow therapy


• Official Fisher and Paykel accessory


• Tested and capable of handling up to 60L/min O2

Benefits: 

• Highly effective flow of humidified oxygen


• Turns your myAIRVO 2 device into an all-in-one solution


• No additional oxygen devices required

Ideal For:

• Those in need of supplemental oxygen during humidified high flow therapy

• 1 x Fisher & Paykel myAIRVO™ 2 Humidifier Oxygen Inlet Kit

Q: Do I need a prescription for supplemental oxygen with the Fisher & Paykel myAIRVO™ 2?
A: Yes, you will need a prescription for supplemental oxygen. The prescription for supplemental oxygen will read as the FIO2 Target.

Q: How do I connect the myAIRVO 2 to oxygen?
A: With the myAIRVO™ 2 Humidifier Oxygen Inlet Kit, this will allow supplemental oxygen to be used with your device.

To install this kit correctly to your myAIRVO 2 device:

Secure the power cord connector to the rear of the unit.
Make sure that the side of the myAIRVO 2 device is clean and free of any smudges or debris.
Attach the tubing to the filter holder approximately 0.3 inch (1 cm).
Remove the adhesive label from the oxygen inlet port and firmly attach to the myAIRVO 2 device.
Wait 24 hours before use to allow the adhesive to set.

Q: What rate of oxygen flow can I use with the myAIRVO 2?
A: It is recommended to use no more than 60L/min of O2 to the oxygen inlet port on the back of your myAIRVO 2 as this may damage or risk spillage onto your device.